Solaris WaterGen A20

Solaris WaterGen A20

Learning about the Solaris WaterGen A20 has just become easy. The temperature and relative humidity of the surrounding air impact the output capacity of the A20 water generator. At ideal temperatures of thirty degrees Celsius and eighty per cent relative humidity, it may effectively extract up to twenty litres of clean water daily from the air.

• No complicated installation processes are required with this plug-and-play gadget; plug it in and follow the handbook’s instructions. Because of its adaptable design may be used in various environments, such as businesses, hotels, and kitchens at home.
• The generation of pure drinking water is guaranteed by the A20 thanks to its sophisticated eight-stage filtering technology. Air, sediment, pre-carbon, ultra-fine membrane, mineralization, nanoceramic-PAC, and LED-UV treatment filters are the components of the filtration process.
• The A20 uses 470W for production while running on an AC 110V 60Hz power supply and an extra 500W for heating.
• The A20L works dependably in various environmental circumstances, with an operating range of temperatures between 15°C and 45°C and relative humidity levels between 30% and 99%.

Description

Key points for the first using HL-A20L AWG

1. After an overseas shipment, keep the HL-A20L stand upright for a full day to guarantee that the machine oil returns to the compressor.
2. The machine must be situated in a well-ventilated area, such as the kitchen, with open windows.

It is preferable to keep the warm rooms and the HL-A20L’s room or space apart if the customer wishes to turn on his air conditioner or another heating system to warm his house.

3. Once the water level on the touch screen reaches half, the consumer can obtain water by pushing the water outlet.

Given the springtime temperature and humidity levels, it will likely take two days to generate enough water to get there.

4-It is preferable to allow the HL-A20L’s generated water to flush and cleanse the internal filters once or twice, which could take five to six days, and then drain the entire amount when the water level reaches 3/4. The buyer can then either drink it or test it. Because during the filter packing process, there may have been some dust on the filters.

5. When the water produced is sufficient to be released through the dispenser, the customer can activate the heating button at the top of the backside. The red safe lock and the hot water dispenser must be turned on simultaneously.
6. In general, we advise always leaving the HL-A20L operating. With its internal water circulation system that cycles every six hours, the HL-A20L can maintain consistently pure water.

7—If the HL-A20L has been off for more than two days, it is advised to empty the water from all tanks and filters and flush the unit before reusing it. Without a circulation system, bacteria and other microbes will readily proliferate in the machine’s water, particularly during hot weather.

The process of flushing the internal water tank and pipes is as follows:

1) Turn the machine on.

2) Fill the lower water tank with tap water until the screen indicates the water level is full.

3) The drainage port at the machine’s back is used to empty the water.

4) Act three times.

5) Obtain water from the hot and cold faucets for the fourth operation. Discard the first water immediately, and examine the second to see if it contains mucus or has an unpleasant odor.

6. If not, it indicates that the issue has been fixed.
7. If any remains, it can mean that the present filters need to be changed because they are no longer functional.