USB power input rated at 5V/2A
Triad Aer Go is a rechargeable, compact Air purifier designed to be a portable option for customers. It features negative ion technology, a built-in USB port, and a separate timed zone mode. It features a cylindrical design to fit in compatible vehicle cup holders. It comes with an 1800mAh battery and can be powered via an external connection.
Triad Aer Go combines convenience and portability with its single-button controls. It doesn’t have any replacement filters. It features an aluminum-alloy and ABS housing and, according to the manufacturer, operates at a noise level below 27 dB. It is intended for smaller spaces of around 10 cubic meters.
The ozone must not be used when people or pets are present. Ozone can cause lung irritation; thus, it must not be used in occupied areas.
USB power input rated at 5V/2A
Negative ion output listed at 12 million ions
Built-in 1800mAh rechargeable lithium battery
USB output rated at 5V/1A for well-suited portable electronics
Separate ozone mode with an automatic ozone shutoff after 15 minutes
ABS construction and Aluminum alloy
Operating noise below 27 dB according to listing
No HEPA replacements filters
Compact 65X153 mm body with a weight of 351g
Fits in vehicle cup holders with a diameter of 70 mm
Blue and orange indicators with single control buttons
Negative-charged ions are produced by Triad Aer Go, with an output of 12 × 10⁶ ions/cm³ according to the manual. This feature helps reduce irritating airborne particles. These particles settle out of the air and attach to nearby surfaces. These settled particles need surface cleaning, or they may become airborne again. This feature distinguishes it from a HEPA filter, which captures airborne particles in its filter.
Dust, pollen, smoke, and other contaminants are targeted by Triad Aer Go. You must not consider these descriptions as guaranteed sterilization performance or airborne removal.
It features a separate advanced oxidation mode that uses activated oxygen, also known as ozone. The ozone output is listed as 100 mg per hour. You can activate this mode by pressing and holding the control button for three seconds. When ozone mode is on, the indicator turns orange. Ozone production stops after 15 minutes automatically.
The manual calls it “ozone sterilization”, yet there is no guarantee that ozone can sterilize a room or a car. According to the EPA, ozone is ineffective for public health standards because many contaminants can produce unwanted byproducts.
The Triad Aer Go measures 65 x 153 mm and is very convenient to carry between locations. It weighs 351 g and includes a battery, reducing the need for installation.
According to the manual, wardrobes, bathrooms, kitchens, desktops, and refrigerators are suitable locations. For vehicles, cup holders can fit Triad Aer Go easily if they are wide enough (around 70mm internally). However, placement should follow environmental requirements. Place the unit securely and keep the inlet and outlet unobstructed. These specifications do not apply to the operating-temperature range, water-resistance rating, or food-storage safety.
Coverage is measured in cubic volume, not sq ft. Manual-listed coverage is less than 10 m³, not 353 sq ft.
Triad Aer Go has an integrated lithium battery featuring 1800mAh that allows it to operate continuously without external power supply or plugged into the vehicle.
According to manual, its full-cobalt lithium battery comes with multiple protection measures to prevent over-discharging, overcharging, short circuits, or high temperatures. Do not interpret these features to use the device outside its operating instructions or expose it to extreme heat.
A full-charge runtime or charging duration is not mentioned in the manual. You can promise a particular number of operating hours relying only on battery capacity.
Ionization mode
Low battery
Ozone mode
Charging in process
Charging complete
Triad Aer Go comes with a charging unit of 5V/2A and a USB output of 5V/1A for compatible portable electronics. According to the manual, the USB output can charge an electronic device when the device is connected to a USB supply of a vehicle or a USB adapter of a cigarette lighter. The adaptor doesn’t come along with the purifier.
The USB output supplies 5V/1A when the unit is operating. It doesn’t specify fast-charging support and you must use it according to the connected device’s requirement.
The operating noise of the purifier is listed less than 27 dB making it ultra-silent. This specification is described in the manual and cannot be taken as a guarantee that the purifier will be totally silent in all settings.
Triad Aer Go comes without any replacement filter. You do not have to buy any replacement filters for this model according to the manual. This unit is mentioned as maintenance-free, this is because there is no filter replacement. Still, you should clean the surrounding surfaces and the housing and place the unit with air openings unblocked.
The manual does not provide an ozone-emission test, so the ionization mode should not be considered as certified ozone-free.
Do not turn on the ozone mode when people or pets are around. Follow manual guide and ventilate after treatment. This 15-minute cycle cannot guarantee that ozone has dissipated.
A compatible USB adaptor is required for a vehicle cigarette-lighter connection that is not included with the unit.
When external power is unavailable, the built-in battery allows the unit to function independently if it is charged.
Many vehicles turn off power to their power sockets when the ignition is off, but all vehicles are not the same. If your vehicle’s USB port remains active, you can get power from the vehicle battery. People and pets should not be around even if the battery-powered mode is on.
These specs are mentioned in the supplied manual:
Triad Aer Go (portable)
GO1.0
5V DC, 1A
5V DC, 2A
100mg/hour
12 × 10⁶ ions/cm³
1800mAh
Less than 10 m³, 353 ft³
Less than 27 dB
Full-cobalt lithium battery
ABS and aluminum alloy
65X153 mm
351g
Ozone production stops after 15 minutes of operation
No HEPA filter replacement
At least 70mm internal diameter
20,000 hours that may reduce with time
RoHS, CE, FCC, and other compliance symbols are displayed on the manual. These markings should not be interpreted as a verification of air-cleaning effectiveness or safe ozone exposure levels.
Following parts are listed in manual:
Indicator LED: blue or orange color display and charging signals
Control button: operates the ozone and ionization modes
Air inlet: positioned around the body
Air outlet: located at the top
USB outlet: supplies power to well-matched portable electronics
Housing case: secures the internal components
USB cable: provides the connection to an external USB power source
Each package includes:
USB adapter for a vehicle cigarette-lighter is not included.
A 12-month warranty is listed in the supplier manual for qualifying product-quality issues, subject to its conditions and exclusions. It also features a 7-day return policy and a 15-day remedy for resolving early failures. Misuse, unauthorized repairs, accessories, and other listed exclusions are not covered.
Triad Aer Go is about 65 mm wide, so it should fit easily in a 70 mm-wide cup holder. Vehicle designs may vary, so choose a compatible device.
Yes, you can run Triad Aer Go 24/7, and it will not affect its efficacy. But remember, the unit has a 20,000-hour service life, and running it 24/7 will affect the machine’s longevity.
Triad Aer GO uses negative ion technology with a separate ozone mode. HEPA filter replacement is not required for this unit.
It covers small spaces of around 10 cubic meters (353 cubic feet). This specification is for air volume, not for floor-area rating.
The blue light indicates ionization mode. When ozone mode is activated, the orange light turns on. Ozone mode will be turned off after 15 minutes of activity.
The USB output provides 5V/1A for compatible devices. The manual doesn’t guarantee fast-charging capability, and the speed will be based on the cable and device.
When the battery is low, the orange indicator starts flashing. The blue light flashes when charging is on and stops flashing when it is charged.
It includes an 1800mAh battery, but the manual doesn’t provide a runtime per charge.
According to the manual, it has approximately 20000 hours of service life. Negative ion and ozone output decreases over time, but the unit may remain functional.
During ozone mode, avoid exposure to the unit. Absence of odor is not a guarantee that ozone levels are safe.
1 20-minute ozone half-life is claimed by the manual. However, complete breakdown takes around two hours. Actual levels vary according to space size, materials, ventilation, and other conditions.
No, this unit is not a substitute for smoke-source removal, routine cleaning, or mold remediation. Cleaning surfaces, removing pollutant sources, and maintaining proper ventilation are also essential.