Skip to content 
Parts and Accessories
Your air purifier is a long-term investment, not an expense. Maintain it properly to keep it effective for years. Get your Triad Aer parts and accessories, including a photoelectric oxidation (PCO) cell, a high-frequency purification plate, and an electrostatic filter. Whether your product is damaged or needs a replacement, it is best to have the correct accessory on hand.
But before you buy, it is important to understand what these replacement parts are and how they differ. Let’s discuss each component and how it differs from the others to identify the part that works best for you.
Find the Right Triad Aer Replacement Part
Many people assume that the PCO cell, high frequency plate, and the electrostatic filter are all the same. However, they are very different components. They cannot be used interchangeably, and they have very different functions from one another. Let’s discuss their main functions below.
Works for the UV and catalyst module in the photoelectrochemical oxidation process
Its operation is limited and requires periodic replacement
Results in the production of activated oxygen during the oxidation process
Conduct manual cleaning and inspection after the reported time
Captures particles and helps keep internal components clean
Washable and reusable; inspect its condition before replacing
Triad Aer Photocatalytic Oxidation Cell
The Triad Aer PCO cell is required for the photocatalytic oxidation process. This cell uses ultraviolet light with a catalyst to initiate the oxidation process.
Most commonly, this cell’s operating life is around 900 hours. If your cell has reached its expected operating life, then it is recommended to replace it with a new PCO replacement cell. While replacement is typically needed after about one year of use, the hours of operation and the air purifier’s condition determine when to replace the PCO cell.
PCO Cell Compatibility
For a Triad Aer V3 replacement, the following cells are listed and should be checked before ordering:
Triad Aer High Frequency Purification Plate
The Triad Aer purification plate is another component of this air purifier that produces activated oxygen; activated oxygen triggers the oxidation process in the catalyst. Activated oxygen exists as ozone and should function according to the device manual. It must be remembered that the high-frequency verification code is different from the PC side and cannot be used as a replacement.
Triad Aer Electrostatic Filter
The Triad Aer electrostatic filter is a filter that is used to protect the other components inside the printer from buildup. It replaces only the line used for Triad Aer V2.0 and V3 units.
Unlike paper filters, it does not have to be discarded after use. It can be washed and reused. Regular cleaning is recommended to ensure that the filter remains undamaged and can be used again.
Check Compatibility Before Ordering
The following checks are important to consider when selecting an appropriate replacement part for Triad :
Don’t choose a replacement just because it looks similar. Fit and electrical compatibility are important.
Determine your purifier’s model number. Check the label on the unit or its owner’s manual.
Identify the component. Confirm whether you need the PCO cell, purification plate or electrostatic filter.
Look at the product specifications. Check compatibility, dimensions, connectors and package contents as applicable.
Review maintenance guidance. See if cleaning or troubleshooting will solve the problem.
Seek assistance if necessary. Tell us the model number and include a clear photo of the current part.
Maintain Your Triad Aer Air Purifier
Since you spend money on your air purifier and want it to work effectively, regular maintenance is your responsibility to keep it in good condition. Make sure the replacement components are off and unplugged during maintenance, and use the manual for more instructions.
Based on the module, read the instructions and clean the accessory parts and components accordingly. Reassemble the air purifier and use it efficiently for effective results. Also keep a record of periodic inspections and cleaning to complete the cleaning and replacement schedule.
Frequently Asked Questions About Triad Aer Parts
Can I get an extra remote control for my Triad Aer V3?
No, the Triad Aer V3 remote control is not there as a separate extra accessory. If you lose your remote control, you can use the built-in control panel.
What replacement parts are available for Triad Aer?
The primary parts available are the TCS cell, the high-frequency purification plate, and the electrostatic filter. Remember, these are different products and cannot be used interchangeably. You need to check compatibility, packaging contents, and current availability based on your air purifier model.
Are the PCO cell and purification plate the same part?
No. The reactor cell serves as a UV and catalyst module for photocatalytic oxidation, while the purification plate produces activated oxygen for operation modes. Both of them are important components but are not interchangeable.
How long does a Triad Aer PCO cell last?
According to the manufacturer, the PCSR lasts around 9,000 hours (1 year). Follow your supplier’s instructions and replace the PCO cell after a year of use.
Can I wash the Triad Aer electrostatic filter?
Yes. It captures dust particles and other buildup. Therefore, clean it according to the instructions. Regular cleaning is recommended every 30 days to keep it working effectively.
Does the electrostatic filter need replacing every year?
Not necessarily. It depends on the filter’s condition and the manufacturer’s guidelines. If the filter is clean, undamaged and properly maintained, it doesn’t need to be replaced. It can be reused.
Will these parts fit the Mini Aer, Triad Aer Go, or Shield Aer?
Every air purifier is different and has different compatibility. So, look for the correct model and compatible accessories before buying any part.
Should I replace all three components at the same time?
Not necessarily. You don’t need to replace all three at the same time. Replace them based on operating life and the manufacturer’s instructions for the air purifier.
How can I get help selecting a replacement part?
Start by noting the regulator model, the part you need and a photo of it. Send it to our team, and we will provide you with the details you need to choose the correct part.
Shop Triad Aer Parts and Accessories
If you’re looking for the right components for your air purifier, we are here to help you find the right product. Whether it is a PCO cell purification plate or electrostatic filters, we will provide the full details of the product, confirm compatibility, and guide you through the process before placing the order.